6/32 Cuir isteach
Cur síos ar tháirgí
3/8 Cnó isteach adhmaid, Hot {- brionnaithe ó phrás - billéid phlátáilte borate - infhillte chun lignin - creimeadh spreagtha {-} {{} {} {} {}} {}} {}} {}} {}}} {}}}} {}}}}} {}}}}}}}}}}}}} lamellate (layered) micro-flanges and crenulated (notched) shanks that, upon torque-driven installation, embed into pre-drilled lignocellulosic matrices, spanning oak cabinet frames, Douglas fir construction trusses, and teak outdoor furniture, through a mechanism where Flange - Cruthaíonn dífhoirmiúchán plaisteach spreagtha snáithíní adhmaid frithsheasmhacht in aghaidh an choimhlint le leathnú hygroscopic, lomadh creathadh, nó ualach teanntachta timthriallach - lochtanna a phléascadh go réidh - leaganacha shank seans maith go n -éireoidh siad i gclós póirse mar phóirse porous mar phíobán.
Déileáiltear leis an tsíolta {- tuiliú ola chun díghrádú fungasach i dtimpeallachtaí tais a fhíorú, tá na cnónna seo níos fearr ná roghanna cineálacha trí choinníoll dé: flanges lamellate le fáinní adhmaid annular, cé go gcinntíonn 16 snáithe in aghaidh an orlach dáileadh ualach intceartach; Cuireann comhoiriúnacht le scriúnna moille agus le boltaí meaisín deireadh le rioscaí neamhréireacha ábhair, le cloí le ASTM F2329 le haghaidh caighdeáin cheanglóra adhmaid, rud a fhágann go bhfuil siad criticiúil le haghaidh carpenters a threisíonn joints i gcumadh adhmaid, decking cnó a chur i mbaol, nó go bhfuil siad ag baint le cnónna troma- dualgas a chur i mbaol.
liosta paraiméadair
| Bileog Sonraí Teicniúla Sreangán Sraith Méadrach - Méadrach (méadrach) Snáitheanna garbh | ||||||||
| Trastomhas ainmniúil (d) | Páirc bíseach (P) | Fad ainmniúil | líon na laps (w) |
Trastomhas seachtrach i SAOR IN AISCE (DZ) |
Trastomhas druileála (a dhéanamh) |
Doimhneacht druileála (L3) |
Fad éifeachtach iarbhír (L2) |
|
| ×d | ×L1 | |||||||
| 1.4 | 0.3 | 1d | 1.4 | 2.5 | 1.80-2.00 | 1.5 | 2.3 | 0.9 |
| 1.5d | 2.1 | 4.5 | 3 | 1.6 | ||||
| 2d | 2.8 | 7.0 | 3.7 | 2.3 | ||||
| 1.6 | 0.35 | 1d | 1.6 | 3.1 | 2.06-2.26 | 1.7 | 2.7 | 1.1 |
| 1.5d | 2.4 | 4.5 | 3.5 | 1.9 | ||||
| 2d | 3.2 | 6.2 | 4.3 | 2.7 | ||||
| 2.5d | 4.0 | 8.0 | 5.1 | 3.5 | ||||
| 3d | 4.8 | 10.1 | 5.9 | 4.3 | ||||
| 2 | 0.4 | 1d | 2.0 | 3.2 | 2.53-2.70 | 2.1 | 3.6 | 1.6 |
| 1.5d | 3.0 | 5.3 | 4.6 | 2.6 | ||||
| 2d | 4.0 | 7.4 | 5.6 | 3.6 | ||||
| 2.5d | 5.0 | 9.5 | 6.6 | 4.6 | ||||
| 3d | 6.0 | 11.6 | 7.6 | 5.6 | ||||
| 2.5 | 0.45 | 1d | 2.5 | 3.6 | 3.20-3.70 | 2.6 | 4.3 | 2.1 |
| 1.5d | 3.75 | 5.9 | 5.6 | 3.3 | ||||
| 2d | 5.0 | 8.2 | 6.8 | 4.6 | ||||
| 2.5d | 6.25 | 10.5 | 8.1 | 5.8 | ||||
| 3d | 7.5 | 12.8 | 9.3 | 7.0 | ||||
| 3 | 0.5 | 1d | 3.0 | 4.2 | 3.80-4.35 | 3.1 | 5.0 | 2.5 |
| 1.5d | 4.5 | 6.8 | 6.5 | 4.0 | ||||
| 2d | 6.0 | 9.4 | 8.0 | 5.5 | ||||
| 2.5d | 7.5 | 12 | 9.5 | 7 | ||||
| 3d | 9.0 | 14.6 | 11.0 | 8.5 | ||||
| 4 | 0.7 | 1d | 4.0 | 4 | 5.05-5.60 | 4.2 | 6.8 | 3.3 |
| 1.5d | 6.0 | 6.6 | 8.8 | 5.3 | ||||
| 2d | 8.0 | 9.1 | 10.8 | 7.3 | ||||
| 2.5d | 10.0 | 11.7 | 12.8 | 9.3 | ||||
| 3d | 12.0 | 14.2 | 14.8 | 11.3 | ||||
| 5 | 0.8 | 1d | 5.0 | 4.4 | 6.25-6.80 | 5.2 | 8.2 | 4.2 |
| 1.5d | 7.5 | 7.1 | 10.7 | 6.7 | ||||
| 2d | 10.0 | 9.9 | 13.2 | 9.2 | ||||
| 2.5d | 12.5 | 12.6 | 15.7 | 11.7 | ||||
| 3d | 15.0 | 15.3 | 18.2 | 14.2 | ||||
| 6 | 1 | 1d | 6.0 | 4.3 | 7.58-7.95 | 6.2 | 10.0 | 5.0 |
| 1.5d | 9.0 | 6.9 | 13.0 | 8.0 | ||||
| 2d | 12.0 | 9.6 | 16.0 | 11.0 | ||||
| 2.5d | 15.0 | 12.2 | 19.0 | 14.0 | ||||
| 3d | 18.0 | 14.9 | 22.0 | 17.0 | ||||
| 7 | 1 | 1d | 7.0 | 5.2 | 8.58-9.20 | 7.2 | 11.0 | 6.0 |
| 1.5d | 10.5 | 8.3 | 14.5 | 9.5 | ||||
| 2d | 14.0 | 11.5 | 18.0 | 13.0 | ||||
| 2.5d | 17.5 | 14.6 | 21.5 | 16.5 | ||||
| 3d | 21.0 | 17.4 | 25.5 | 20.5 | ||||
| 8 | 1.25 | 1d | 8.0 | 4.8 | 9.85-10.35 | 8.3 | 13.0 | 6.8 |
| 1.5d | 12.0 | 7.4 | 17.0 | 10.8 | ||||
| 2d | 16.0 | 10.6 | 21.0 | 14.8 | ||||
| 2.5d | 20.0 | 13.5 | 25.0 | 18.8 | ||||
| 3d | 24.0 | 16.5 | 29.0 | 22.8 | ||||
| 9 | 1.25 | 1d | 9.0 | 5.5 | 10.85-11.1 | 9.3 | 14.0 | 7.75 |
| 1.5d | 13.5 | 8.9 | 18.5 | 12.25 | ||||
| 2d | 18.0 | 12.2 | 23.0 | 16.75 | ||||
| 2.5d | 22.5 | 15.5 | 27.5 | 21.25 | ||||
| 3d | 27.0 | 18.8 | 32.0 | 25.75 | ||||
| 10 | 1.5 | 1d | 10.0 | 5.0 | 12.10-12.80 | 10.3 | 16.0 | 8.5 |
| 1.5d | 15.0 | 8.1 | 21.0 | 13.5 | ||||
| 2d | 20.0 | 11.2 | 26.0 | 18.5 | ||||
| 2.5d | 25.0 | 14.2 | 31.0 | 23.5 | ||||
| 3d | 30.0 | 17.3 | 36.0 | 28.5 | ||||
| 11 | 1.5 | 1d | 11.0 | 5.7 | 13.10-13.50 | 11.3 | 17.0 | 9.5 |
| 1.5d | 16.5 | 9.1 | 22.5 | 15.0 | ||||
| 2d | 22.0 | 12.5 | 28.0 | 20.5 | ||||
| 2.5d | 27.5 | 15.9 | 33.5 | 26.0 | ||||
| 3d | 33.0 | 19.1 | 39.0 | 31.5 | ||||
| 12 | 1.75 | 1d | 12.0 | 5.3 | 14.50-15.00 | 12.4 | 19.0 | 10.3 |
| 1.5d | 18.0 | 8.4 | 25.0 | 16.3 | ||||
| 2d | 24.0 | 11.6 | 31.0 | 22.3 | ||||
| 2.5d | 30.0 | 14.8 | 39.0 | 30.3 | ||||
| 3d | 36.0 | 18.0 | 43.0 | 34.3 | ||||
| 14 | 2 | 1d | 14.0 | 5.4 | 16.87-17.87 | 14.5 | 22.0 | 12.0 |
| 1.5d | 21.0 | 8.7 | 29.0 | 19.0 | ||||
| 2d | 28.0 | 11.9 | 36.0 | 26.0 | ||||
| 2.5d | 35.0 | 15.2 | 43.0 | 33.0 | ||||
| 3d | 42.0 | 18.4 | 50.0 | 40.0 | ||||
| 16 | 2 | 1d | 16.0 | 6.3 | 18.87-19.90 | 16.5 | 24.0 | 14.0 |
| 1.5d | 24.0 | 10.0 | 32.0 | 22.0 | ||||
| 2d | 32.0 | 13.7 | 40.0 | 30.0 | ||||
| 2.5d | 40.0 | 17.5 | 48.0 | 38.0 | ||||
| 3d | 48.0 | 21.2 | 56.0 | 46.0 | ||||
| 18 | 2.5 | 1d | 18.0 | 5.6 | 21.40-22.00 | 18.6 | 28.0 | 15.5 |
| 1.5d | 27.0 | 9.0 | 37.0 | 24.5 | ||||
| 2d | 36.0 | 12.3 | 46.0 | 33.5 | ||||
| 2.5d | 45.0 | 15.7 | 55.0 | 42.5 | ||||
| 3d | 54.0 | 19.0 | 64.0 | 51.5 | ||||
| 20 | 2.5 | 1d | 20.0 | 6.3 | 23.46-24.40 | 20.6 | 30.0 | 17.5 |
| 1.5d | 30.0 | 10.0 | 40.0 | 27.5 | ||||
| 2d | 40.0 | 13.8 | 50.0 | 37.5 | ||||
| 2.5d | 50.0 | 17.5 | 60.0 | 47.5 | ||||
| 3d | 60.0 | 21.2 | 70.0 | 57.5 | ||||
| 22 | 2.5 | 1d | 22.0 | 6.9 | 25.61-26.90 | 22.6 | 32.0 | 19.5 |
| 1.5d | 33.0 | 11.0 | 43.0 | 30.5 | ||||
| 2d | 44.0 | 15.0 | 54.0 | 41.5 | ||||
| 2.5d | 55.0 | 19.0 | 65.0 | 52.5 | ||||
| 3d | 66.0 | 23.0 | 76.0 | 63.5 | ||||
| 24 | 3 | 1d | 24.0 | 6.3 | 28.15-29.10 | 24.7 | 36.0 | 21.0 |
| 1.5d | 36.0 | 10.0 | 48.0 | 33.0 | ||||
| 2d | 48.0 | 13.7 | 60.0 | 45.0 | ||||
| 2.5d | 60.0 | 17.5 | 72.0 | 57.0 | ||||
| 3d | 72.0 | 21.2 | 84.0 | 69.0 | ||||
| 27 | 3 | 0.75d | 20.25 | 5.0 | 31.15-32.40 | 27.8 | 32.5 | 17.5 |
| 1d | 27.0 | 7.2 | 39.0 | 24.0 | ||||
| 1.5d | 40.5 | 11.4 | 52.5 | 37.5 | ||||
| 2d | 54.0 | 15.4 | 66.0 | 51.0 | ||||
| 2.5d | 67.5 | 19.5 | 79.5 | 64.5 | ||||
| 30 | 3.5 | 1d | 30.0 | 6.9 | 34.70-35.81 | 30.9 | 44.0 | 26.5 |
| 1.5d | 45.0 | 11.0 | 59.0 | 41.5 | ||||
| 2d | 60.0 | 15.0 | 74.0 | 56.5 | ||||
| 2.5d | 75.0 | 19.0 | 89.0 | 71.5 | ||||
| 3d | 90.0 | 23.0 | 104.5 | 86.5 | ||||
| 33 | 3.5 | 0.75d | 24.8 | 5.6 | 37.70-39.01 | 33.9 | 38.8 | 21.3 |
| 1d | 33.0 | 7.8 | 47.0 | 29.5 | ||||
| 1.5d | 49.5 | 12.2 | 63.5 | 46.0 | ||||
| 2d | 66.0 | 16.5 | 80.0 | 62.5 | ||||
| 36 | 4 | 0.75d | 27.0 | 5.1 | 41.33-42.67 | 37.0 | 43.0 | 23.0 |
| 1d | 36.0 | 7.0 | 52.0 | 32.0 | ||||
| 1.5d | 54.0 | 11.1 | 70.0 | 50.0 | ||||
| 2d | 72.0 | 15.2 | 88.0 | 68.0 | ||||
Iarratas ar tháirgí
Scóip an iarratais ar mhuinchille sreinge cruach
1. Réimse Innealra Tionsclaíoch: Oiriúnach do Uirlisí Meaisín Dleachta Trom -, Uirlisí Meaisín CNC, Comhlachtaí Bosca, Flanges, Seafta Tarchurtha agus Comhpháirteanna Eile. Féadann sé feabhas a chur ar neart teanntachta agus lomadh na bpoll snáithithe, cosc a chur ar sciorradh snáithe agus caitheamh mar gheall ar fhórsa téarma nó creathadh fada -, agus tá sé an -oiriúnach chun snáitheanna na bhfoshraitheanna miotail brittle mar iarann teilgthe agus cruach theilgthe a neartú.
2. Réimse déantúsaíochta agus cothabhála na ngluaisteán: a úsáidtear i gcodanna tábhachtacha amhail cinn sorcóra innill, Cásálacha Tarchurtha, Lúibíní Fionraí Fonnadh, srl.
3. Aerospace Field: Oiriúnach do chomhpháirteanna láidreachta ard - amhail fearas tuirlingthe aerárthaí, casings innill, frámaí fuselage, srl. Mar ard {- teochtaí ísle airde agus brúnna arda.
4. Réimse trealaimh leictreonaigh agus beachtais: curtha i bhfeidhm ar na sliogáin agus ar chomhpháirteanna inmheánacha trealamh an stáisiúin bhunaidh chumarsáide, ionstraimí diagnóiseacha leighis (mar mheaisíní CT, trealamh ultrafhuaime), agus ionstraimí agus méadair bheachtais. Féadann sé snáitheanna beachta a chruthú ar fhoshraitheanna tanaí - mar phlaistigh agus cóimhiotail éadroma, rud a choisceann na poill snáithithe ó scoilteadh mar gheall ar fhórsa míchothrom, agus ag cinntiú cobhsaíocht naisc chomhpháirteanna trealaimh.
5. Feistí Leighis Réimse: Úsáidte in ionstraimí máinliachta (mar uirlisí máinliachta ortaipéideacha), lúibíní trealaimh leighis, srl.
6. Sean -Threalamh Snáithe Réimse Deisiúcháin: Le haghaidh Poill Snáithe Sean -Threalamh a Chaitear, Slippage -, mar shampla treoracha uirlisí meaisín, rollóirí innealra priontála, ticéid caidéil uisce mhóra, etc. Trí sleeves sreinge cruach a shuiteáil, is féidir an fheidhm snáithithe a athchóiriú, ag leathnú saol seirbhíse an trealaimh agus ag laghdú costas eacnamaíoch athsholáthair an trealaimh.
Faisnéis bhunúsach
| Múnla Múnla | M1.2-100 |
| Treoir uainíochta | Ar chlé/ar dheis |
| Deimhniú | ISO, ROHS |
| Grád cruinn | 6h |
| Láimhseáil suiteála | Gnéas a bheith agat le |
| Pacáiste iompair | Málaí Corpoideachais+Cartáin+Pailléid |
| Trádmharc | JBK |
| Cód HS | 7318190000 |
| Úsáid | Foirgneamh, innealra, leighis, roicéad, loingseoireacht, ceimiceán |
| Saincheaptha | Saincheaptha |
| Ar fad | Saincheaptha |
| Caoincecht teochta | 932Fahrenheit-1382Fahrenheit |
| Sonraíocht | Pacáiste 30cm x 26cm x 18cm |
| Bun | Poirceallán |
| Cumas táirgthe | 3000000 píosa/lá |
Ceisteanna CCanna
C: Cad é an téarma íocaíochta?
A: Is iad T/T & L/C na téarmaí íocaíochta is fearr. Chomh maith leis sin tá an tAontas an Iarthair - inghlactha le haghaidh íocaíochtaí ar luach íseal, cosúil le táille sainráite an tsampla.
C: Cá fhad a bhíonn do chuid ama seachadta?
A: Tá stoc mór againn, 3 lá le haghaidh míreanna stoic, 7-15 lá le haghaidh táirgthe.
C: An soláthraíonn tú samplaí? An bhfuil sé saor in aisce nó an bhfuil táillí breise de dhíth air?
A: Tá, d'fhéadfaimis samplaí saor in aisce a thairiscint do na míreanna atá i stoc, ní gá dúinn ach an costas loingseoireachta a íoc.
C: Cad iad do théarmaí íocaíochta?
A: 50% roimh ré, 50% roimh an seachadadh 100% roimh ré más lú ná USD5000.
C: Cad iad do théarmaí praghsanna?
A: exw/FOB/CIF/CFR/FCA/CPT/CIP/DAP/DDP
C: Cad é do raon táirgí?
A: Cuimsíonn ár raon táirgí iatáin snáithe, iatáin tailless, trealamh deisiú snáithe, uirlisí isteach snáithe, féin - ag cur isteach ar an snáithe, agus na heochracha.
Vedio
Clibeanna Te: 6/32 Ionsáigh, an tSín 6/32 Monaróirí a chur isteach, Monarcha
You Might Also Like
Glaoigh Linn